Galvion Viper Helmet Accessories

The BATLSKIN VIPER VISOR SYSTEM is a lightweight and easy to use protective enhancement to the Batlskin Head Protection System. It provides flawless optics to ensure the soldier is never distracted from the mission, while its unique pivot arm allows for three in-service positions: up when not in use, vented for cooling, and locked in the down position to protect against movement during blast and ballistic impact.

BALLISTIC PERFORMANCE (V50)

804 fps (245 m/s), 17 gr (1.1 g) FSP

WEIGHT

Full system (lens and arm) – 9.7 oz (275 g) – size Medium

IMPACT PROTECTION

Visor system is able to withstand multiple impacts over 23 joules, equivalent to the current U.S. helmet impact standard

CONSTRUCTION AND DESIGN

Three-position visor arm attaches to the Batlskin Front Mount: Up, vented and locked position allows for full ballistic coverage

Designed to fit an M50 Gas Mask when the Visor is in the closed position, providing simultaneous CBRN and ballistic protection

OPTICS

Lens optically engineered ensuring flawless optics throughout the eyes’ range of movement
Lens coated with Revision’s high performance OcuMax® coating, protecting against fogging, scratching and common military chemicals

SIMPLE MOUNTING SYSTEM

Mounted to the helmet using the Batlskin Front Mount with standard NVG interface to decrease
training time and increase standardization. Simple and ergonomic design for ease of use; one-handed attachment without tools or removing helmet Maintains a low profile in up position – reduces interference in enclosed spaces

AVAILABLE SIZES

Small, Medium, Large and X-Large

The BATLSKIN VIPER MANDIBLE GUARD provides best-in-class lower-face protection in a strapless design that’s lightweight, quick to fit without tools and quick to remove while on the run. Available in ballistic and wire configurations to suit the mission at hand, each Mandible Guard attaches to the Batlskin Front Mount, minimizing training while providing rapid attachment and removal of the system.

BALLISTIC PERFORMANCE

Ballistic Mandible Guard protects against:
– 17 gr (1.1 g) FSP V50 > 2200 ft/s (671 m/s), equivalent to U.S. Army ACH requirement
– 9mm FMJ threats at 1400 ft/s (427 m/s), equivalent to U.S. Army ACH requirement
Protects against NIJ IIIA level threats

WEIGHT

Ballistic Mandible Guard – 425 g – size Medium
Wire Mandible Guard – 435 g – size Medium

GEOMETRY AND CONSTRUCTION

Close fitting design interfaces with communications systems
Ballistic Mandible Guard is constructed of Ultra-high-molecular-weight polyethylene (UHMWPE)
Wire Mandible Guard is composed of steel, offering blunt force protection, increased situational awareness and no sound interference

IMPACT PROTECTION

Ballistic and Wire Mandible Guard Systems are able to withstand multiple impacts over 45 joules (double the current U.S. helmet impact standard) with no damage

ATTACHMENT MECHANISM

Securely attaches using the Batlskin Front Mount and allows for rapid don and doff. Two buttons on either side allow mandible guard to be tilted downwards in varying degrees for improved sight compatibility, eating and drinking. Pushing the mandible against the chest brings it back to original position – a quick, hands-free operation. Designed to utilize the Batlskin Front Mount, avoiding the need for additional attachment accessories

FINISH

Standard colors with textured surface finish
CBRN resilient version available

AVAILABLE SIZES

Small, Medium, Large and X-Large

The BATLSKIN VIPER FRONT MOUNT is a lightweight, multi-purpose mount with an interchangeable center piece system. Serving as a Night Vision Goggle (NVG) mount in a slim and easy to use design, the receiver component can be swapped to accommodate various NVG interface plates. The Front Mount enables seamless integration of the Batlskin Visor, Mandible Guards and rails. Tested in a wide range of operational venues, the Batlskin Front Mount delivers class-leading stability for NVG use and the crucial ability to up-armor when needed.

BALLISTIC PERFORMANCE (V50)

Mounted using supplied ballistic hardware that passes U.S. ACH 9mm FMJ impact tests

WEIGHT

Weighs only 83 g – size Medium

FINISH

Standard colors with textured surface finish

AVAILABLE SIZES

Small, Medium, Large and X-Large

CONSTRUCTION AND DESIGN

Slim, lightweight and snag free design – Can be worn all day, every day
Reinforced nylon construction with assembled aluminum NVG plate for strength and durability
Compatible with widely used NVGs, such as the PVS-7 and PVS-14; upgradable receiver to use L-3 and ENVGiii NVGs. Designed for secure helmet mounting, preventing rotational axis movement
Revision’s NVG shock cord integrates with Front Mount to provide additional stability for NVG use
External wing interface offers improved robustness to support the attachment of modular components. Allows for quick donning and doffing of Visor and Mandible Guard
Integrates with the Batlskin interlocking accessory rails providing increased sturdiness and stability. Uses existing helmet holes – no new drilled holes required

Revision’s BATLSKIN VIPER LONG RAILS offer a system upgrade enabling quick and easy head borne accessory attachment. Offering the ability to tailor the helmet depending on the mission at hand, the rail system allows for cameras, lights, and other accessories to be outfitted. The rails have multiple entry points and accept widely used rail bases, such as the Desert Locust Goggle swivel clip, picatinny and winged rail bases.

BALLISTIC PERFORMANCE

Mounted using supplied ballistic hardware that passes U.S. ACH 9mm FMJ impact tests

WEIGHT

Interlocking – Weighs only 80 g – left and right rails, size Medium
Standalone – Weighs only 97 g – left and right rails, size Medium

FINISH

Standard colors with textured surface finish

CONSTRUCTION AND DESIGN

Matches helmet shell curvature ensuring secure helmet mounting for accessory stability. Design allows for easy, one-handed attachment of widely used rail bases. Entry points along upper and lower dovetails enable multiple accessories to be mounted. Accommodates O2 clip for use with oxygen masks. Slim, lightweight and snag free design. Uses existing helmet holes – no new drilled holes required

AVAILABLE SIZES

Small, Medium, Large and X-Large