Maztech Industries
X4 Complete System
X4 Complete System
The Maztech X4 Complete System. The X4-LRF and X4-FCS can each function independently. Or link them together for the ultimate fire control and ranging solution. There are three Configuration Options- see below:
X4-FCS with X4-LRF on Front Rail
- The X4-FCS sits at 1.93” (49mm) Height Above Rail (HAR).
- The X4-LRF low-profile design allows for mounting on the front rail without blocking the view of your scope.
- The X4 FCS-to-LRF Cable* comes in 8” (203 mm) and 20” (508 mm) lengths to accommodate various weapons and configurations.
- Augment your setup with either the X4 Low-Profile Remote or the X4 Rail-Mounted Remote.
X4-FCS with X4-LRF Mounted Above
- For compact rail configurations, the X4 Diving Board Mount enables the X4-LRF to be mounted above the X4-FCS.
- The X4 FCS-to-LRF Cable is still utilized in this configuration.
- The X4 Low-Profile Remote or X4 Rail-Mounted Remote is easily added here also.
X4-FCS with X4-LRF on Side Rail
- Similar to the front rail configuration.
- In this configuration, the 20” X4 FCS-to-LRF Cable is recommended.
The Maztech X4 Complete System. The X4-LRF and X4-FCS can each function independently. Or link them together for the ultimate fire control and ranging solution. There are three Configuration Options- see below:
X4-FCS with X4-LRF on Front Rail
- The X4-FCS sits at 1.93” (49mm) Height Above Rail (HAR).
- The X4-LRF low-profile design allows for mounting on the front rail without blocking the view of your scope.
- The X4 FCS-to-LRF Cable* comes in 8” (203 mm) and 20” (508 mm) lengths to accommodate various weapons and configurations.
- Augment your setup with either the X4 Low-Profile Remote or the X4 Rail-Mounted Remote.
X4-FCS with X4-LRF Mounted Above
- For compact rail configurations, the X4 Diving Board Mount enables the X4-LRF to be mounted above the X4-FCS.
- The X4 FCS-to-LRF Cable is still utilized in this configuration.
- The X4 Low-Profile Remote or X4 Rail-Mounted Remote is easily added here also.
X4-FCS with X4-LRF on Side Rail
- Similar to the front rail configuration.
- In this configuration, the 20” X4 FCS-to-LRF Cable is recommended.