LaRue Tactical ACOG Mount QD, LT100
This QD-mount for the Trijicon ACOG with a two-lever design provides exceptional durability, stability and repeatability.
This QD-mount for the Trijicon ACOG with a two-lever design provides exceptional durability, stability and repeatability.
Trijicon MRO Cantilevered QD Mount, LT849
This Trijicon MRO™ QD mount is cantilevered forward to arch over receiver junctions, providing maximum room on the flat top behind the optic. The height provides 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattops.
This Trijicon MRO™ QD mount is cantilevered forward to arch over receiver junctions, providing maximum room on the flat top behind the optic. The height provides 1/3 co-witness with the Iron Sights on M4 Carbine and AR-15 Flattops.
LaRue Tactical Trijicon RMR Mount, LT827
This QD-mount for the Trijicon RMR-series positions the optic at lower-1/3 co-witness when used with iron sights. The LT827 is designed specifically for use with standard AR15 flat top receivers. A slight cantilever allows positioning of the optic slightly forward of the front-edge of the receiver
This QD-mount for the Trijicon RMR-series positions the optic at lower-1/3 co-witness when used with iron sights. The LT827 is designed specifically for use with standard AR15 flat top receivers. A slight cantilever allows positioning of the optic slightly forward of the front-edge of the receiver
LaRue Tactical Trijicon RMR Mount, LT837
This Trijicon RMR QD-mount is as low as possible.
This Trijicon RMR QD-mount is as low as possible.
Pivot Mount for EOTech 3x Magnifier, LT755-S-EO
Our LaRue pivot mount for EOTech Magnifier users. When used in combination behind a “red-dot” optic, magnifiers make all the difference. The LT755-S-EO QD mount allows the acquisition targets at longer distances, or by quickly pivoting the magnifier out of the way, the optic can be used for CQB. The LT755-EO allows the magnifier to be pivoted in and out of position in seconds.
Our LaRue pivot mount for EOTech Magnifier users. When used in combination behind a “red-dot” optic, magnifiers make all the difference. The LT755-S-EO QD mount allows the acquisition targets at longer distances, or by quickly pivoting the magnifier out of the way, the optic can be used for CQB. The LT755-EO allows the magnifier to be pivoted in and out of position in seconds.
LaRue Tactical EOTech QD Mount LT110
The LT110 raises the EOTech by .275″. This extra height places the iron sight low in the EOTech’s window. Raised Picatinny rail at the back allows you to mount a PVS-14 or Aimpoint 3X Magnifier in perfect co-witness.
The LT110 raises the EOTech by .275″. This extra height places the iron sight low in the EOTech’s window. Raised Picatinny rail at the back allows you to mount a PVS-14 or Aimpoint 3X Magnifier in perfect co-witness.
LaRue Tactical Aimpoint Micro Mount, LT751
This QD-mount for the T-1/T-2 & H-1/H-2 provides users absolute-co-witness with iron sights. The LT751 is designed specifically for use with standard AR15 flat top receivers, with iron sights in the down position.
This QD-mount for the T-1/T-2 & H-1/H-2 provides users absolute-co-witness with iron sights. The LT751 is designed specifically for use with standard AR15 flat top receivers, with iron sights in the down position.
LaRue Tactical QD Pivot Mount, LT755
Designed to place a 3X Magnifier in perfect centreline with the sight. With durability and simplicity in-mind, the angled spring-tensioned pivoting arm rotates on a robust shaft. No buttons, no switches, simply pull back, move it in-position and release. The LT755 shown fits 30mm bodies.
Designed to place a 3X Magnifier in perfect centreline with the sight. With durability and simplicity in-mind, the angled spring-tensioned pivoting arm rotates on a robust shaft. No buttons, no switches, simply pull back, move it in-position and release. The LT755 shown fits 30mm bodies.