Brevis Suppressors

DeltaP’s advanced 3D printed suppressors, offer unparalleled strength with durability similar to barrel life even on machine gun platforms.

eltaP designs produce complex gas paths and drain not possible with conventional manufacturing processes. The result suppressors compact enough to act as a muzzle break replacement with the sound and flash signature reduction of full size suppressor.

BREVIS II ULTRA 5.56 NATO RIFLE SUPPRESSOR

This suppressor is likely the lightest 5.56 NATO suppressor available. The Brevis II 5.56 grew from the concept of offering a fully functional sound and flash suppressor within 2X of the length and weight envelope of a traditional 5.56 flash hider. Despite its short length, this suppressor supplies performance appropriate for full length suppressors. The suppressor offers extremely light weight while at the same time possessing excellent durability.

The Brevis II 5.56 Ultra is 7.5 oz. and 3.7 in overall length. It is constructed of one monolithic piece of high strength Titanium alloy with its blast surface reinforced with a proprietary high nickel superalloy. The Brevis II 5.56 Ultra is our shortest and lightest 5.56 Nato offering.

As with the other Brevis II suppressors, the suppressor may be installed as a replacement muzzle device to the rifle. It is possible to service the rifle barrel with the suppressor attached.

SPECIFICATION

Overall Length: 3.7 in (94mm)
Weight: 7.5 oz. (210 g)
Diameter: 2.0 in. (51 mm)
Mounting Thread: 1/2-28 UNEF RH 3B
Wrench Flats: 3/4 in. (19 mm)
Materials: Select Titanium & High Nickel Super Alloy
Coatings: High Temperature Ceramic

BREVIS II ULTRA 8.6MM RIFLE SUPPRESSOR

The Brevis II Ultra 8.6mm is a new take on the big bore rifle suppressor. This suppressor transforms the typical perception of a suppressor for the .338 Lapua and similar rifles into something that may be considered a part of the rifle system. The 5.5” overall length (4.9” added to the length of the barrel) makes this a replacement muzzle device vs. an afterthought. The sub 10oz. weight means that carry and cantilevered weight are minimized to single multiples of most existing muzzle brakes and flash hiders. This suppressor offers durability similar to barrel lifespan. Barrel maintenance may be performed with the suppressor attached.

These attributes allow the Brevis II Ultra 8.6mm suppressor to be an armorer installed compliment to the rifle. Gone are the heavy and complex brakes and quick attach devices. This allows the rifle operator to have confidence in the accurate performance of their platform.

The Brevis II Ultra 8.6 is rugged and durable. This highly effective suppressor completely removes multiple part assembles and replaces them with a suppressor consisting of a single part: without welds, threaded attachments or other traditional failure points.

For those looking to couple brutal ruggedness with light weight and exceptional performance, the Brevis II 8.6mm delivers.

SPECIFICATION

Overall Length: 5.5 in (140 mm)
Weight: 10 oz. (280 g)
Diameter: 2.0 in. (51 mm)
Mounting Thread: 5/8-24 UNEF RH 3B
Wrench Flats: 3/4 in. (19 mm)
Materials: Select Titanium & High Nickel Super Alloy
Coating: High Temperature Ceramic

BREVIS II 7.62MM RIFLE SUPPRESSOR

The Brevis II 7.62 is a pinnacle in the refinement of the 7.62 muzzle mount suppressor. The 7.62 Brevis II introduces a fully hardened Inconel suppressor with a weight (16 oz.) similar to the expected weight of a 7.62 titanium suppressor. Even with the light weight and short overall length of 5.5” (4.9” added to barrel length) the Brevis II 7.62 displays outstanding performance. This suppressor provides flash reduction similar to if not exceeding most dedicated OEM flash hiders. In addition, sound reduction is superb, with a unique soft, deep tone.

The lifespan of this suppressor is similar to barrel life of the host weapon. The entire suppressor is constructed as a single homogeneous part without welds, threaded connections, seams or other traditional failure points.

As a precision rifle suppressor, this suppressor is consistent, accurate, and may be permanently installed on the host platform. The barrel may be maintained with the suppressor installed allowing the suppressor to function as a replacement muzzle device. Internal geometry is specifically designed to enhance accuracy while minimizing weapon signature through unique internal geometry and patented distribution of available internal volume.

Consistent, durable, lightweight, and compact: the Brevis 7.62 enhances the 7.62 platform as nothing before.

SPECIFICATION

Overall Length: 5.5 in (140 mm)
Weight: 16 oz. (450 g)
Diameter: 2.0 in. (51 mm)
Mounting Thread: 5/8-24 UNEF RH 3B
Wrench Flats: 3/4 in. (19 mm)
Materials: Hardened Inconel
Coating: High Temperature Ceramic